Quick notes
Short tips to look up while designing.
Status first
Display > Status shows DRCs, unrouted nets and out-of-date shapes in one place. Open it before generating any output.
Database Check
Tools > Database Check with DRC and shape updates fixes database inconsistencies before the final review.
Global shape parameters
Shape > Global Dynamic Parameters adjusts thermal reliefs and void clearances of all dynamic shapes at once.
Footprint changed? Update it
After fixing a footprint in the library, use Place > Update Symbols to bring the new version into the board.
Units, grid and accuracy
Setup > Design Parameters holds units, decimal accuracy, grids and display. Set them in the company template.
Empty PCB Footprint
Before the netlist, generate a BOM including the PCB Footprint property and filter blanks: the fastest way to find symbols without a footprint.
Schematic DRC
Tools > Design Rules Check finds single-pin nets and duplicate references — errors that become hours of debugging in layout.
Read netrev.lst
If the import fails, the netlist log file tells you exactly which footprint is missing or which pin does not match.
The right class on the order
The bare-board class (IPC-6012 / IPC-A-600) and the assembly class (IPC-A-610 / J-STD-001) must be consistent and written in the fabrication notes.
QFN thermal pad
Split the paste aperture into windows (windowpane) covering part of the area instead of a single opening: fewer voids and less component floating.
Moisture and storage
Moisture-sensitive boards and components (J-STD-033) need controlled storage and, when required, baking before reflow.
Fiducials
Common practice: 3 fiducials per side, ~1 mm copper pad with a 2–3 mm mask opening, away from the edge and with nothing nearby.
Readable silkscreen
Typical minimum line around 0.15 mm and text height ≥ 0.8 mm. No legend over pads — the fabricator will clip it.
Return path
A fast signal never crosses a plane split. When changing layers, place a ground via next to the signal via so the return follows.
Decoupling
Decoupling capacitor as close as possible to the pin, with short, direct vias to the plane. Mounting inductance matters more than the capacitor value.
The 3W rule
Rule of thumb to reduce crosstalk: center-to-center trace spacing of ~3× the width. Confirm with simulation on critical signals.