Why standardize
A wrong footprint is an expensive mistake: the board is built and the part does not solder. IPC-7351 (evolving into IPC-7352) defines how to compute land dimensions from component, fabrication and assembly tolerances, and proposes a naming convention that describes the component in the name itself.
Naming
| Name | Meaning |
|---|---|
| RESC1608X55N | Chip resistor, 1.6 × 0.8 mm body, 0.55 mm height, nominal density (0603 imperial) |
| CAPC2012X125N | Chip capacitor, 2.0 × 1.2 mm, 1.25 mm height (0805) |
| SOIC127P600X175-8N | SOIC, 1.27 mm pitch, 6.0 mm lead span, 1.75 mm height, 8 pins |
| QFP50P1200X1200X160-64N | QFP, 0.5 mm pitch, 12 × 12 mm lead span, 1.6 mm height, 64 pins |
The suffix indicates density: M (most — larger lands, more robust), N (nominal) and L (least — more compact). For most products, N is the starting point.
Padstacks in Allegro X
The Padstack Editor creates .pad files. For each layer you define:
- Regular pad — the pad copper.
- Thermal relief and anti-pad — connection to and isolation from planes (for plated holes).
- Solder mask — mask opening, usually the pad plus an expansion agreed with the fabricator.
- Paste mask — stencil aperture; on large thermal pads, split it into windows (IPC-7525).
The footprint (.dra/.psm)
- Origin at the body center (or pin 1, per your standard) — consistent with the pick-and-place file.
- Place bound with component height, for 3D and height checks.
- Silkscreen off the pads, with a clear pin-1 mark.
- Assembly outline and reference on the assembly layer.
- Courtyard to guarantee room between components.

Validation checklist: compare with the datasheet mechanical drawing, print at 1:1 scale and overlay the physical part, and check pin numbering against the schematic symbol.
References and further reading
- IPC — land pattern standards (IPC-7351 / IPC-7352)
- Sierra Circuits — technical blog (footprints and DFA)
Original text for educational purposes. Menus and commands may vary between Allegro X versions; check the Cadence documentation for your version.